LED

Monroe Glass Pulley Bathroom Wall Light IP65

£389.16

Select Finish (View Finishes in Tab next to Description) -

Antique Brass

Antique Silver - Indoor Only

Polished Brass - Indoor Only

Satin Brass - Indoor Only

Natural Brass

Inner Glass - Bulb Cover

200cm Cable

+ £6.00

300cm Cable

+ £12.00

–

Delivery

Free UK Mainland Delivery on this item

Description

The Monroe is an industrial pulley wall light suitable for installation in locations where moisture-resistance is a requirement. With a classic vintage design, the Monroe pulley wall light will add a touch of industrial appeal to your bathroom or living space.

This industrial pulley wall light is very versatile. The spacing between the pulley arm and wall bracket is variable, allowing the drop to be adjusted as desired.

The Monroe pulley wall light has a stepped glass cone shade that helps diffuse light from the bulb within. A teardrop-shaped glass lamp shade encloses an LED tube light inside its waterproof surround.

The Monroe pulley wall light is available to order in antique brass, antique silver, polished brass and satin brass.

Note: Due to product design, this light fitting requires the bulb to be max;

6.5 watt LED
Diameter 38mm
Length 140mm

Brass Finishes

Mullan Brass Light Finishes

Each light is shown with its finish options, however we can often have lights finished in either another antique or brass finish or if you want a coloured light they can be powder coat finished in one of the colours.

Our products are hand finished therefore each item is unique. The colours shown below are intended as an indication only and some variation is to be expected.

Many of the brass lights can also be finished in a powder coated colour finish, see below.


Antique Silver	Antique Brass	Polished Brass	Polished Chrome

Polished Copper	Satin Brass	Satin Chrome

Powder Coated Paint Finishes

White	Yellow	Sage Green	Red

Orange	Grey	Racing Green	Powder Bronze

Gloss Black	Matt Black	Powder Chrome	Powdered Gold

Specification

Lead Time	2-3 Weeks
Product Weight	2.2 kg / 4.9 lb
Height	77-102cm
Width	18cm
Projection	32cm
Standard Cable/Chain Length	100cm
Material	Brass, Glass
IP Rating	IP65
Light Bulb Base	E27
Max Wattage	6.5W LED
Wall Bracket	MLWB12 \| 11.5cm Diameter
Glass Code	GLWP01 (Read Terms)
Voltage	110v/120v or 220v/240v (depending on delivery location)
Protection Class	Class II
CE Approved	Yes
UKCA Approved	Yes
Environmental Management Charge (EMC)	Included in the price of this product is a contribution to recycling costs of â‚¬0.05

Add Light Bulbs

Check the number of bulbs required for this fitting:

Light Bulb BaseE27 Max Wattage6.5W LED

Light Bulbs can be added via the Drop down at bottom of page in the Checkout - You can Select Quantity:

All Lights with an inner glass require a T30 Tube Bulb - (Bathroom IP65 versions mostly)
E27 is a standard Bulb Base - E14 is Usually a small Candle Bulb
4 w LED = 40 Old Watt Bulb / 6w LED = 60 Old Watt Bulb / 8w LED = 75 Old watt Bulb (all approx. depending on manufacturer)
Pearl LED bulbs are good for outdoor lights and a 5 watt LED will give plenty of light for most walkways outside.
If your light will only take a lower wattage, we will provide the correct version.
Teardrop / Edison Antique are good for brass finished or decorative lights.
Dimmable LED Bulbs can be used with or without a dimmer - but need an LED dimmer if you use one.

Ask a Question

Monroe Glass Pulley Bathroom Wall Light IP65 27-MLBWL105

Ask a Question about this product , we will try and get back to you within the day (Monday - Friday)

A few popular FAQ's

Q. Are your lights dimmable?

A. All our lights can be dimmed, if your using LED light bulbs you need a dimmable bulb and suitable dimmer switch, we also supply these options.

Q. Are your Brass lights lacquered?

A. Most of Mullan's lights are made from brass (unless otherwise stated) and will therefore be lacquered to prevent tarnishing and save you polishing, with the exception of Natural Brass that isn't lacquered so it can age. You can specify lights to be unlacquered if you prefer.

Q. I would like a different colour or finish to my light.

A. Many of our lights have multiple finishes or colours shown as options, if you want something different this may be possible at extra cost, let us know we may well be able to help.

All FAQ's (opens in new tab) or use the form below to ask about this product.

Name

Phone

Optional

E-Mail Address

Subject

Message